************************************************************************* ** ** ** MAGICARD LTD ** ** ** ************************************************************************* ** ** ** PROJECT : ID Card Printer Support Utility ** ** ** ** DOC No. : 3186 ** ** ** ** MODULE NAME : Amendment Record ** ** ** ** COPYRIGHT : Magicard Ltd ** ** ** ************************************************************************* ** ** ** AMENDMENT RECORD ** ** ** ************************************************************************* ************************************************************************* DATE DCR VERSION 08/10/2018 xxxxx V3.70 1. Change the toolset projec setting to targer 110_XP specifically ************************************************************************* DATE DCR VERSION 13/08/2018 xxxxx V3.69 1. The tool will no longer display Ultima or RioPro360 printers in the USB drop down list. This will prevent any unecessary lockups. ************************************************************************* DATE DCR VERSION 04/07/2018 xxxxx V3.68 1. The tool is now aware of the communication loss during the TST command. It will display a warning dialog and display a 'Wait Cursor' until communications is resumed. The tool will also clean up the communications bottleneck in the printer so that all other functions are uneffected. ************************************************************************* DATE DCR VERSION 15/05/2017 xxxxx V3.67 1. The utility now derives the model name from the printer itself so we don't have to reissue the tool every time we have a new OEM variant. ************************************************************************* DATE DCR VERSION 08/05/2017 xxxxx V3.66 1. New OEM printers: Pilot, Compass, PRO 100, PRO 500, PRO 700, Pridento Open Data ************************************************************************* DATE DCR VERSION 16/02/2017 xxxxx V3.65 1. Correct the AUthentys PID. ************************************************************************* DATE DCR VERSION 03/02/2017 xxxxx V3.64 1. New OEM printers: "Prindento+ Open Card", "M300", "M500", "Enduro3E LE", "RIo Pro LE", "XR160", "XR260", "XR360", "AUthentys" ************************************************************************* DATE DCR VERSION 09/19/2016 xxxxx V3.63 1. On the identity tab, allow the end limit to be from 0 to 100 in response to shrinking rolers. ************************************************************************* DATE DCR VERSION 04/10/2016 xxxxx V3.62 1. Allow for the screen check printers ************************************************************************* DATE DCR VERSION 23/06/2016 xxxxx V3.61 1. AA added USB connection'diconnection monitoring. ************************************************************************* DATE DCR VERSION 13/04/2016 xxxxx V3.60 1. Include limit checks on Printhead and Image positioning ************************************************************************* DATE DCR VERSION 06/04/2016 xxxxx V3.59 1. Fixed a bug with the recognition of Enduro+ printers ************************************************************************* DATE DCR VERSION 24/02/2016 xxxxx V3.58 1. Include Orphicard Duplet printrs ************************************************************************* DATE DCR VERSION 22/12/2015 xxxxx V3.57 1. Inclue Essentra and P-Card printers ************************************************************************* DATE DCR VERSION 13/010/2015 xxxxx V3.56 1. Inclue DOPPIE 100,200 &3000 printers. ************************************************************************* DATE DCR VERSION 11/08/2015 xxxxx V3.55 1. Add Enduro3e, ID 2350e, iT-2600 and RIo Pro Plus printers ************************************************************************* DATE DCR VERSION 03/02/2015 xxxxx V3.54 1. Include Pridento Pro and Pridento Pro Xtended printers ************************************************************************* DATE DCR VERSION 15/12/2014 xxxxx V3.52 1. Display "Unknown Printer" if an unknown DTC printer is enumerated. 2. Prevent connection to Optima printers. ************************************************************************* DATE DCR VERSION 05/11/2014 xxxxx V3.51 1. Include DoH printers ************************************************************************* DATE DCR VERSION 17/06/2014 xxxxx V3.50 1. Include ING171 and ID Pro printers ************************************************************************* DATE DCR VERSION 07/05/2014 xxxxx V3.49 1. Set the default to be HiCo on the Mag Encode(ISO) tab ************************************************************************* DATE DCR VERSION 19/03/2014 xxxxx V3.48 1. Ensure -RF printers are catered for. (minor error corrections ) ************************************************************************* DATE DCR VERSION 12/03/2014 xxxxx V3.47 1. Supress dialog initialisation upon the issuing of Tag commands ************************************************************************* DATE DCR VERSION 4/03/2014 xxxxx V3.46 1. Include the new MUT numbers and USB Pids along with Win 7 XP Mode build methodology ************************************************************************* DATE DCR VERSION 26/02/2014 xxxxx V3.45 1. Include Secuprinter S200, Pridento and Pridento+ ************************************************************************* DATE DCR VERSION 16-01-14 xxxxx V3.43 1. Correct the decoding of the JIS2 data in the mag read function ************************************************************************* DATE DCR VERSION 14-05-13 xxxxx V3.42 1. Correct the PPC model identifiers ************************************************************************* DATE DCR VERSION 04-04-13 xxxxx V3.41 1. Aisino JKE700C and JKE160 printers ************************************************************************* DATE DCR VERSION 16-10-12 xxxxx V3.40 1. ID Maker Advantage+ Static IP address fix. (send button) ************************************************************************* DATE DCR VERSION 22-08-12 xxxxx V3.39 1. ID Maker Advantage+ ************************************************************************* DATE DCR VERSION 03-07-12 xxxxx V3.38 1. Allow negative start positions ************************************************************************* DATE DCR VERSION 22-05-12 xxxxx V3.37 1. Plus Card Enduro+ also Polaroid P4500S+ ************************************************************************* DATE DCR VERSION 18-04-12 xxxxx V3.36 1. Fix clerical errors in PID numbering ************************************************************************* DATE DCR VERSION 4-04-12 xxxxx V3.35 1. Allow for ID2300,ID3300, P310e and Authentys Plus ************************************************************************* DATE DCR VERSION 28-03-12 xxxxx V3.34 1. Include JIS2 Functionality 2. Omnikey enablement ************************************************************************* DATE DCR VERSION 05-03-121 xxxxx V3.33 1. Allow for the inclusion of the Enduro+ 2. fix the TST hicup ************************************************************************* DATE DCR VERSION 19-10-11 xxxxx V3.32 1. Allow for ethernet connected Enduro family products ************************************************************************* DATE DCR VERSION 19-07-11 xxxxx V3.31 1. Include the Rio Pro - X 2. Improve the USB write funtionality ************************************************************************* DATE DCR VERSION 28-03-11 xxxxx V3.30 1. Exctend the quick command to allow for 63 characters. ************************************************************************* DATE DCR VERSION 28-03-11 xxxxx V3.29 1. Include new Authentys family and Branded Pro's ************************************************************************* DATE DCR VERSION 04-11-10 xxxxx V3.28 1. Include new IDMAKER family and Branded Pro's ***************************************************************************************************************** DATE DCR VERSION 13-10-10 xxxxx v3.27 1 Allow for PPC Australia Printers ***************************************************************************************************************** DATE DCR VERSION 20-09-10 xxxxx v3.26 1. Modify the Magnetic Encoding Tab to allow the selection of COercivity. ***************************************************************************************************************** DATE DCR VERSION 01-09-10 xxxxx V3.25 1. Ensure the correct connection type is shown in the QPR query. ***************************************************************************************************************** DATE DCR VERSION 17-08-10 xxxxx V3.24 1. Allow the internet tab to be functional for Rio Pro Printers 2. Modify the front screen to imply multiple printers may be connected 3. Remove the word Magicard from error messages. ***************************************************************************************************************** DATE DCR VERSION 22-07-10 xxxxx V3.23 1. Allow for Composite and Polaroid Printers ***************************************************************************************************************** DATE DCR VERSION 28-05-10 xxxxx V3.22 1. Ensure USB enumeration names and model type are correct for the RIO Pro ***************************************************************************************************************** DATE DCR VERSION 06-05-10 xxxxx V3.21 1. Enable USB enumeration to recognise AUTHENTYS 2. Rebrand as ID Card Printer Support Utility ***************************************************************************************************************** DATE DCR VERSION 04-06-09 30814 V3.20 1. Enable USB enumeration to recognise IDMAKER 2. Enable all Enduro Family Printer models to be recognised individually ***************************************************************************************************************** DATE DCR VERSION 21-05-09 30752 V3.19 1. Fix a bug with the display of model type 2. Include IDMAKER compatability (Enduro Family) ***************************************************************************************************************** DATE DCR VERSION 03-04-09 30691 V3.18 1. Belt and Braces for the msv data buffers to ensure that there are no buffer overflows. ***************************************************************************************************************** DATE DCR VERSION 27-01-09 30602 V3.17 1. New and Enhanced USB Printer Selection Interface ***************************************************************************************************************** DATE DCR VERSION 10-01-09 30602 V3.16 1. The Enduro/Pronto firmware requires a different protocol string for magnetic encoding. ***************************************************************************************************************** DATE DCR VERSION 04-12-08 30537 V3.15 1. Include PRONTO Compatability. 2. Fix the Enduro/Pronto VSR and MSV interface. ***************************************************************************************************************** DATE DCR VERSION 27-08-08 30374 V3.14 1. Use MIP command when SAVE button is pressed on Printer Identity tab when connected to an Enduro printer 2. Send a RST after the DEF command when default button used, change focus back to Comms tab, disconnecting printer. ***************************************************************************************************************** DATE DCR VERSION 17-03-08 30179 V3.13 1. Include Enduro Compatability ***************************************************************************************************************** DATE DCR VERSION 05-12-07 30060 V3.12 1. Identify connection type within Query reports 2. Implement new Sensor Query feature ************************************************************************************************************************************************** DATE DCR VERSION 30-8-07 29822 V3.11 1. Mag Read function included for all models. 2. Added ability to upgrade Tango+L laminator firmware ************************************************************************* DATE DCR VERSION 24-11-06 29382 V3.07 1. Addition of "Mag Read" page. 2. General GUI tidy-up to accomodate 2 rows of tabs (was previously 1). ************************************************************************* DATE DCR VERSION 31-8-06 xxxxx V3.06 1. Correction of textual reference to Dealer Tool. ************************************************************************* DATE DCR VERSION 29-8-06 29261 V3.05 1. Addition of PID display to Printer Identity page. ************************************************************************* DATE DCR VERSION 15-8-06 29198 V3.04 1. Major redesign of layout, with addition of "Statistics and Commands" and "Magnetic Encoding" pages. ************************************************************************* DATE DCR VERSION 28-6-06 29144 V3.03 1. Adding adjustment of the printhead position ************************************************************************* DATE DCR VERSION 31-3-06 29055 V3.02 1. Correct inclusion of the INPOUT32.DLL in the Installshield build ************************************************************************* DATE DCR VERSION 28-3-06 29021 V3.01 1. Correction of bug whereby some PCs crashed when PRN file is downloaded. Packet sized reduced to 10000 byte chunks, not default 64k bytes. ************************************************************************* DATE DCR VERSION 24-3-06 Not V3.00 Released 1. Addition of Ethernet Tools. 2. Correction to the installation build to include INPOUT32.DLL ************************************************************************* DATE DCR VERSION 10-01-06 28957 V2.01 1. The presence of other devices on the USB bus is handled on XP but not on Windows 98. Here the printer must still be the only item connected to the USB bus ************************************************************************* DATE DCR VERSION 12-09-05 28806 V2.00 1. Added Ethernet comms 2. Corrected situation where Printer must be the ONLY thing on the bus when using USB. Now, there must be only one Magicard printer on the bus, but the presence of other devices is handled. ************************************************************************* DATE DCR VERSION 14-2-05 28497 V1.03 1. Modification of the QPR facility to operate with Rio 2 & Tango 2 2. Connection now possible using USB or LPT. ************************************************************************* DATE DCR VERSION 12-10-04 28281 V1.02 1. Provision of the Query Printer (QPR) facility. ************************************************************************* DATE DCR VERSION 1-6-04 28134 V1.01 1. Renamed from 'Alto Opera Support Tool' to 'Magicard Support Utility' 2. Amendment to Installshield GUID to prevent conflict with other tools 3. Change Installshield scripts to alter mode of uninstallation i.e. by selection from the Add/Remove Programs applet of Control Panel, rather than by a second running of the installation .exe file. 3. After performing a firmware upgrade, Utility closes down. 4. Provision for displaying 20 'special' models, and Avalon. ************************************************************************* DATE DCR VERSION 3-2-04 V1.00 1. Initial Release